Most of the miniature RC boat that you can observe on most of the lakes nowadays take the plunge on the water the very same as the full-sized boat do. Actually, there’s not much difference once they were in the water and for this reason, it is also important that you take care of the boat’s drive shaft in order that it will not develop any leaks since in case it do then that will greatly diminish the life and performance of the tiny boat. Leakage sealing is not that difficult as long as you have the necessary tools and technical know-how on how to exactly do it.
To start with, you will have to set the RC boat somewhere stable like a workbench and the like and make sure that you take a look at the surface of the shaft. Carefully examine the surface and look for any cracks. In case you discover one, you can then use a screwdriver to remove the screws that secures the drive shaft to the main body of the boat. As soon as you get hold of the drive shaft, it is important that you take the time in cleaning it and make sure that it is dry before you try to place it back once again.
Of course, once you are done, return the drive shaft to the RC boat and if possible, use a waterproof silicone to coat the stuffing box and let it dry for around 24 hours in order that it will resist water for as much as possible.
Related posts:
- Guide On Preparing RC Boat For Water There are some things you have to take care of...
Related posts brought to you by Yet Another Related Posts Plugin.